Modern Washing Machine Troubleshooting Guides To Help You Save With Simple DIY Repairs

Today, modern appliances may seem intimidating, but the repairs are a lot easier than what you may think if you know what you are looking for. Often, the repairs are simple to do, such as replacing a belt, door seal or even the main circuit board of the appliance. The following washing machine troubleshooting guide will help you get to the bottom of the problem and save money with simple DIY repairs:

Problems with Supply Hoses and Fittings Not Providing the Machine with The Water it Needs

One of the biggest issues that you will want to check with your washing machine is the water supply. If you have an error code that says the machine is not getting water, first check to make sure the valve is on. If this does not solve the problem, you may want to change the supply hose to a larger diameter to ensure the appliance is getting enough water for proper operation.

Worn or Loose Belts Cause the Machine to Not Work Efficiently or Errors During Operation

Another common problem with washing machines and dryers is the belts wearing out. This can sometimes just be the belt becoming loose and tightening it will often solve the problem. If the belt is too worn to be tightened or broken, then you will need to replace it to get your washing machine working again.

Door Seals and Fasteners That Wear Out and Need to Be Replaced to Prevent Problems

The door seals on modern washing machines are important components that prevent water from spilling out of the drum system and causing damage to the appliance and your home. Sometimes the seal can crack or the fastener that holds it in place can break and cause the appliance to not work. Replace the door seal if you are having problems with the door closing before it causes damage to the electronics or water damage from it leaking.

Problems with Water and Heat That Can Damage the Main Controller Board That Needs to Be Replaced

If a broken seal causes water to get inside the washing machine, this can cause damage to the electronic circuits inside the appliance. The water problems and heat from elements inside the machine often cause the main control board to burn out. The good news is that this is often an easy problem to fix. All you will need to do is order a new main circuit board and replace it to get your washing machine working again.

These are some tips that will help you with troubleshooting washing machine problems and fix them with affordable DIY repairs. If you need the pieces to complete your repairs, contact a washing machine parts service like Electric Appliance Parts Co to get what you need to do these repairs yourself.


Share